 Portable Wash Pads
Site Navigation
|
  Pick Your Wash Location
|
Pick
Your Washing
Location |
This alley was the
perfect spot. A little cleanup and the equipment is ready
to be placed. |
Setting Pads In Place
|
Set
Portable Wash Pads In
Place |
As the first pad is
placed, a level is taken to ensure that there is about 2'
of slope to the side of the Hydropads where the side gutters
connect. This gets the water and solids going where they need
to go.
These pads were shimmed
with a 1X4. Pretty simple! |
Side Gutter Placement
|
Lay
Out High Solids
Collection Gutters |
In this installation,
the side gutters were installed against the building. It works
perfectly because all the wash and water filtration equipment
is on the other side of the wall. |
Location For Wash and Recycling
Equipment
|
Identifiy
Equipment
Location |
This wall will be cleaned
up and the equipment will go right here. The Hydropad is just
outside this wall. |
Hydroblaster and Hydrokleen
The utilities, 110 volt power and a water supply, were
already there. The customer
already had a pressure washer.
No sewer connection
was available so the Hydrokleen recycling system provided
for re-use of the wash water. |
Up and Washing
That's it. Let the
washing begin! |
|
