|
|
  HE/8000, dual stage polishing
filter with oil coalescing
|
| Wastewater
Treatment or Recycling Removing; Oil/Grease, Light Hydrocarbons
& Heavy Metals, used in any pressure washing or
wastewater processing application. 25 GPM Flow rate. |
- Certified to CE and UL979 Standards
- Overflow protection
- Self cleaning tanks
- Gravity flow through design
- Primary solids incline tank
- 230,000 sq. in. of oil coalescing plates
- Take your pick of any two polishing loops: solids, light
hydrocarbons or metals.
- PLC controls daily operation and maintenance functions
- Optional remote operation monitoring
HE/8000 Specifications
(PDF format)
|
How The HE/8000 Works
The HE/8000 is
designed with three complete modules: (1) oil/water separation;
(2) a polishing loop for hydrocarbon removal; (3) a polishing
loop for metals removal. As dirty water enters the HE/8000
it slows down, allowing the solids to fall to the bottom of
the coalescing tank and the oil water separation to begin.
Gravity causes the oily water to flow through 230,000 square
inches of oil coalescing plates. These plates allow the oil
to gather together into large droplets where they can float
to the surface and be mechanically skimmed from the water.
Virtually oil-free water then flows into a multi media-polishing
loop, which reduces light and emulsified hydrocarbons to less
than 10 ppm. The water then moves to a polishing loop for
metals reduction. Dual polishing loops circulate water at
100 GPM assuring multiple passes through the job-specific
media which prepares the water for recycling or direct to
sewer discharge. Processed fluid is suitable for reuse or
discharge to a sanitary sewer. |
|
Customer Comments 
