 Water Filtration
Site Navigation
|
  Stand Alone above ground Oil
Coalescing and Skimming Systems
Why Oil Coalescing
and Skimming?
In wastewater produced
by washing, there are many uncontrolled contaminants that can
be introduced into the wastewater. For instance, the washing
may require a spraying with an engine solvent like Gunk. The
resulting oil, grease and solvent mixture produces emulsified
hydrocarbons. Our “Stand Alone” oil coalescing and skimming
systems will coalesce (bring together) these very small droplets
of emulsified oil for removal by a programmable oil skimmer.
Oil is then deposited into the container of your choice for
simple disposal.
These oil coalescing
and skimming systems can be integrated into any pre-treatment
or reclaim system.
|
OCS210
 |
OCS210
|
This medium flow
unit with its 150,782 square inches of oil coalescing media
brings together oils and grease, floating them to the surface
for removal by its automatic belt skimmer.
250 Coalescing/
Skimming
Flow: 50 GPM Constant
Use: Multiple-tunnel (friction), automatics and hand-held
carwashes. Application where heavy oil accumulation occurs.
|
OCS500
 |
OCS500
|
This high flow unit
with its 225,043 square inches of oil coalescing media brings
together oils and grease, floating them to the surface for
removal by its automatic belt skimmer.
500 Coalescing/
Skimming
Flow: 50 GPM Constant, 70 GPM intermittent
Use: Multiple-tunnel (friction), automatics and hand-held
carwashes. Application where heavy oil accumulation occurs. |
|
