 Pressure Washers
Site Navigation
|
  Pressure Washer Remote Control Stations
Pressure
Washer Remote Control
 |
Our
Standard Remote
Control
|
Our standard remote
control unit allows the operator to start/stop and control
the burner of any electric powered Hydroblaster pressure washer.
Its NEMA 4X box makes
it super safe when coupled to your Hydroblaster with magnetic
motor starter and 24 volt (low voltage) controls. All sealed
push button controls keep water out and electricity in. Lighted
buttons show when the Hydroblaster pressure washer is in use.
Multiple remote stations
can allow access to your Hydroblaster pressure washer from
anywhere in your plant. You just run high pressure pipe and
low voltage control wire back to the Hydroblaster.
|
Control
Your Pressure Washers Water Supply
 |
Recycled
or Fresh Water
Remote
|
Another Hydro
Engineering Inc. first
The Recycled / Fresh
water remote control station that allows you to control the
inlet water source to your Hydroblaster pressure washer. Now
you can wash with recycled water as long as you want, then
with the flip of a switch you can convert to fresh water providing
a clean water rinse.
Using recycled water
for washing has never been easier.
|
Multiple
Pressure Washers Controlled by Multiple Remotes
 |
Multiblaster
Remote Controller
|
Introducing the Hydro-Multiblaster
controller.
Now you can control
multiple Hydroblaster pressure washers at multiple locations
around your plant. Here is what makes this different:
One pipe connects
all washers and remotes, saving thousands in installation
costs
Any Hydroblaster pressure washer can be controlled by any
remote station
You can operate as many remotes as you have Hydroblasters
available, all simultaneously
During Hydroblaster maintenance one or more machines at
a time can be taken off line without interruption of the entire
system.
This is not an expensive combined "In Plant" system, the
Multiblaster controller will operate any standard Hydroblaster
with a magnetic motor starter.
Once in operation the Multiblaster stations become trigger
actuated On/Off that does not require the operator to access
the remote station, he just pulls the trigger.
Multiblaster
Remote Control Specification
|
Remote
Equipment Module REM
 |
|
 |
Stationary REM |
|
Portable REM |
REM's Come in many
configurations allowing simultaneous chemical foaming and
hot high pressure washing at each remote station.
- Portable, wheel mounted with chemical tank
- Pedestal mounted
- Wall mounted
Remote
Equipment Module Specifictaions Sheet |
Many Other Remote Stations Are
Available
To meet any need, Hydro Engineering
Inc. builds many other types of specialized remote control
systems for pressure washing equipment . |
|
